Temperature Cycling Chambers | Environmental Test Chambers | Temperature Chambers | Thermal Chambers | Thermal Cycling | Thermal Cycling Chambers

Temperature Cycling Chambers

ThermalAir Series of Temperature Test Chambers

The ThermalAir TA5000 is a compact, portable bench top environmental heating and cooling temperature cycling chamber system.

Download the Datasheets

Temperature Cycling Test Chamber

Thermal Cycling Test Devices

Temperature Testing Range
Instead of taking your parts that need temperature cycling to an oven or environmental test chamber, our temperature cycling chamber test system allows you to perform your thermal test temperature profiling right where you need it – at your test bench, on your production floor or in your test laboratory.

The ThermalAir temperature chambers systems are a  series of high capacity thermal air stream systems that are used for thermal testing, fast temperature cycling and device temperature characterization of components, hybrids, modules, PCBs, and other electronic and non-electronic assemblies at precise temperature ranges from -90°C to +225°C.

ThermalAir Temperature Cycling Chambers

The ThermalAir TA-5000 products with a wide range of temperature cycling capabilities. Bench top -40°C to +80°C applications to temperature cycling -100°C to +300°C environmental test. The TA-5000 is used for temperature testing in engineering product development test labs and production test floors for semiconductor IC devices and all kinds of electronic – non-electronic components and other parts and assemblies.

Temperature Cycling Chamber

TA-5000A Thermal Stream Temperature Test System
TA-5000A Thermal Stream
with Glass Cap

Temperature Cycling Chamber

TA-5000A Test Enclosure with Hood
TA-5000A Thermal Test Enclosure
with Hood

Temperature Cycling Chamber

TA-5000A with Temperature Cycling Chamber
TA-5000A Environmental Chamber
with Flex Hose

Temperature Cycling Chamber

TA-5000B Temperature Test Chamber with Flex Hose
TA-5000B Environmental Chamber
with Flex Hose

Specification Features & Benefits

  • Ultra Cold Temperatures maintained at 50&60Hz
  • Dual Touch Screens Front Panel & Thermal Head
  • Plug-in anywhere from 200~250VAC, 1Ø
  • ECO Smart DC system for up to 50% energy saving
  • No voltage configuration to use at different locations
  • Versatile Boom & Stand – Extended reach standard
  • SSD for thermal file management and data logging
  • Control Heated dry air purge for frost free operation
  • One touch Temp Cycle, Ramp, Soak and Dwell
  • Ultra low audible noise for quiet engineering lab use

Environmental Temperature Testing Chamber - Temperature Test Systems and Thermal Test System

System Performance

 

  • Airflow: High capacity 10 l/s (20 scfm) continuous airflow optimizes temperature transition rate and throughput.
  • Typical Temperature transition rate:
-55° to +125°C: approximately 10 seconds
+125° to -55°C: approximately 10 seconds
  • Temperature Control: Environment Air or External DUT sensing directly at the DUT case to ±1.0°C
  • Temperature control Sensor Ports: Type T or Type K thermocouple, and 100 ohm RTD
  • Temperature set, display and resolution: ±0.1°C
  • Temperature Accuracy: 1.0°C ( calibrated to NIST standard)
  • Remote interface ports: Four: IEEE-488, RS232C, SOT/EOT/SFF, And Ethernet, 4 USB-Type A, 1 USB-Type B, VGA, LAN, PLUS Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb. All this makes for simple control and service ability.

 

Temperature Cycling Test Chambers

MPI Thermal Test Chambers meet the demand for localized environmental temperature testing.

The ThermalAir temperature test equipment is used for thermal test of semiconductor,  automotive sensors,fiber optic components, microwave, hybrids, MCMs, PCBs or any type of electronic and non-electronic parts. Our temp cycle systems connect to your test setup to bring temperature test capabilities directly to your bench top or test station.

Temperature Cycling Chamber
Temperature Cycling Chamber Clamshell Model

Temperature Cycling Test Chamber
Temperature Cycling Test Chamber Hood Model

With quality construction, this innovative technology allows you to perform temperature simulation tests in situ, at a specific location, at your tester station, test bench, or directly on the unit under test.

error: Content is protected !!