Thermal Cycling Chamber | Thermal Cycler Chamber | Thermal Cycling Testing | Thermal Cycling | Thermal Cycling Test Equipment | Thermal Cycling Test Systems | Thermal Cycling Test | Thermal Cycling

An Evolution in Localized Thermal Cycle Testing Chambers

ThermalAir TA-5000 Series of Thermal Cycling Test Chambers

The ThermalAir TA-5000 is a compact, portable bench top environmental heating and cooling thermal cycling air stream system.

Learn More
Thermal Cycling Chamber System

Thermal Test Devices

index-thermalrange.pngInstead of taking your parts that need temperature conditioning to an large oven or large environmental chamber, our thermal test system allows you to perform your thermal test temperature profiling right where you need it – at your test bench, on your production floor or in your test laboratory.

The ThermalAir Thermal Cycling products are a series of high capacity thermal air stream systems that are used for thermal testing, fast thermal cycling and device temperature characterization of components, hybrids, modules, PCBs, and other electronic and non-electronic assemblies at precise temperatures from -90°C to +225°C

Two Color Touch Screen Displays

The ThermalAir TA-5000A has a front panel display and a thermal head display. The thermal head color touch screen gives the user the ability to set temperature parameters and monitor all system operations at the test site location.

Learn More

Some Applications:

  • Product Engineering
  • Back-End Test
  • Incoming Inspection
  • IC Handler Verification
  • Functional Test
  • Cooling the IC while Stress Full Cycle
  • Failure Analysis
  • Final Test

ThermalAir Systems

The ThermalAir TA-5000 products with a wide range of temperature capabilities. Bench top -40°C to +80°C applications to thermal cycling -100°C to +300°C environmental test. The TA-5000 is used for thermal cycle testing in engineering product development test labs and production test floors for semiconductor IC devices and all kinds of electronic – non-electronic components and other parts and assemblies.

TA-5000A with Hood
TA-5000A with Clamshell & Flex Hose
TA-5000A-with-Glass-Cap-2TA-5000A with Glass Cap
TA-5000A-with-Hood-1TA-5000A with Hood
TA-5000A-with-Clamshell-&-Flex-Hose-2TA-5000A with Clamshell & Flex Hose
TA-5000B-with-Flex-Hose-1TA-5000B with Flex Hose
TA-5000B-with-Clamshell-&-Flex-Hose-1TA-5000B with Clamshell & Flex Hose

Performance Plus Flexibility

TA-5000

TA-5000

Learn More
ThermalAir Acessories

ThermalAir Acessories

Learn More
ThermalAir Compact Chambers

ThermalAir Compact Chambers

Learn More
Thermal Cycling Chamber | Thermal Cycler Chamber | Thermal Cycling Testing | Thermal Cycling | Thermal Cycling Test Equipment | Thermal Cycling Test Systems | Thermal Cycling Test | Thermal Cycling

ThermalAir TA-5000A Head with Glass Chamber

Outputs a controlled clean dry thermal air stream directly on your test part

OUTPUT TEMPERATURE CONTROL

ThermalAir can control by user setting, the ramp rate, temperature transition time as fast as -55°C to +125°C in less than 10 seconds

HOW DOES IT WORK

The TA-5000’s built-in air dryer and filtering system sends clean dry air (CDA) through its powerful internal chiller / heat exchanger to delivers hot & cold temperatures from -100°C up to +300°C.

User can control flow rate from 2 to 20 SCFM. The ThermalAir thermal cycling test chamber system is all self-contained. You just plug it in and it’s ready to start thermal cycling to test your parts. [No configuration required].

Learn More

System Performance

  • Airflow: High capacity 10 l/s (20 scfm) continuous airflow optimizes temperature transition rate and throughput.
  • Typical Temperature transition rate:
-55° to +125°C: approximately 10 seconds
+125° to -55°C: approximately 10 seconds
  • Temperature Control: Environment Air or External DUT sensing directly at the DUT case to ±1.0°C
  • Temperature control Sensor Ports: Type T or Type K thermocouple, and 100 ohm RTD
  • Temperature set, display and resolution: ±0.1°C
  • Temperature Accuracy: 1.0°C ( calibrated to NIST standard)
  • Remote interface ports: Four: IEEE-488, RS232C, SOT/EOT/SFF, And Ethernet, 4 USB-Type A, 1 USB-Type B, VGA, LAN, PLUS Auto Start Test & End of Test for automatic thermal cycling Hot-Cold-Amb. All this makes for simple control and service ability.

accessories-04

Compact Chamber Clamshell Model

accessories-05

Compact Chamber Hood Model

Environmental Chambers | Environmental Test ChambersLocalized Environmental Chambers | Test Chamber | Temperature Cycling Chambers |Thermal Test Chamber | Temperature Test Chamber | Benchtop Test Chamber | Climatic Chambers